Most of the time, turning your iPhone into a mobile hotspot is an instant and hassle-free process as it only requires you to enable this option in the Settings app. However, we all had issues with our phones, refusing to connect to other devices or not being able to share Wi-Fi networks without interruption. If you are having specific problems connecting to the access point, here are some of the best ways to troubleshoot Wi-Fi access point on iPhone.
In this article, Niketrainers.com.co will tell you:
1. Is your iPhone Hotspot active? Do you have the correct password?
Before you delve deeper, it’s important to cover the basics. Are you sure you have activated your iPhone’s Hotspot? To check this, go to the Settings app and select “Personal Hotspot”. You should see a switch next to “Allow others to join”. The switch must be on (green). While there, you should also check your iPhone’s Wi-Fi hotspot password.
If you’re having trouble connecting to your iPhone’s Wi-Fi hotspot, you’ll need to start a Wi-Fi setup on the device you’re connecting to. Select a Wi-Fi network named after your iPhone and enter the password if prompted.
2. Restart (don’t restart!) Your iPhone
As for the more obvious things, we recommend restarting your iPhone, which is a surprisingly easy solution to many problems. In other words, it turns your device on and off, which should be simple. (Don’t confuse this with restarting the phone, which is a much more drastic move.)
If you have an iPhone X, 11, or 12, you’ll need to press and hold the volume down button and the side button. The “Slide to Power Off” screen will appear, and after following its direction and waiting for about 30 seconds, you can turn the device on again.
If you have an iPhone 6, 7, 8 or SE, press and hold the Power button until the Slide to Power Off slider appears. Drag the slider and wait about 30 seconds before turning on the device again.
3. Can other devices join the Hotspot?
By default, your iPhone’s Personal Hotspot allows you to attach any device (with the correct password, of course). However, by checking that this option is active (and turning it off briefly), you can restart your iPhone’s Personal Hotspot.
To do this, go to “Settings -> Personal Access Point”. We hope this feature is already enabled on your iPhone. If not, turn it on from there. If so, you can turn the feature off, wait about 10 seconds, and then turn it on again.
4. Restart your iPhone’s cellular connection
Another way to fix the Wi-Fi access point problem on iPhone would be to restart the cellular connection. To do this, go to “Settings -> Cellular”. Flip the switch on the top right of Basement Data. Wait for about 10 seconds, then turn this option back on.
5. Check for operator configuration updates
In some cases, the pending operator settings update may cause problems with the internet connection on the smartphone. The only way to check if this is the cause of the problem is to go to “Settings -> General -> About”. Wait for about 10 seconds and see if a message appears prompting you to apply an operator update. If nothing happens, go to the next step.
6. Activate “Maximize Compatibility” on the iPhone Wi-Fi hotspot
Since the iPhone 12 offering includes 5G support, it has a different set of network settings. You should go to “Settings -> Personal Access Point -> Maximize Compatibility”. By default, this feature is turned off, so you can turn it on.
7. Check for iOS software updates
Keeping your iPhone up-to-date is crucial for a number of reasons. If you haven’t updated your iPhone in a while, we strongly recommend that you do so. Go to “Settings -> General -> Software Update”. Wait a few minutes for the device to check for updates. If you can see an update available, go to installing it.
8. Reset network related settings
In some cases, there may not be a logical explanation as to why the iPhone’s Wi-Fi access point is not working. If nothing helps you troubleshoot the Wi-Fi access point on your iPhone, we recommend that you reset your device’s network settings. Go to “Settings -> General -> Reset -> Reset Network Settings”. Select this option, confirm your decision and remember to restart your device when finished.
9. Restore factory settings on your iPhone
We have to admit that this is a nuclear option. However, factory resetting iPhone can solve all kinds of technical problems. However, before erasing the device contents, you can learn how to backup iPhone. Here’s our guide showing you how to factory reset an iPhone.
10. Ask Apple or your carrier for help
If you’ve tried all the steps earlier in this guide to troubleshoot your iPhone’s Wi-Fi access point and nothing has worked for you, you have no choice but to seek help from someone else.
Our recommendation would be to contactApple Customer Service. However, if you don’t have an Apple Store nearby, you can also ask your mobile operator for help.
Ending
Now that you have learned to troubleshoot the Wi-Fi access point on your iPhone, we sincerely hope our tips have helped you solve the problem. However, if this is not the case, check out our iPhone Mobile Data Troubleshooting guide for additional tips.