It’s been a long time since the original release of Windows 10, and if you missed your chance to get a free update on your existing PC, or you want to install it on a brand new PC, you may need a little help.
That’s what we’re here for. This way you can download and install Windows 10 on your computer. Let’s set it up.
Note– If instead you want to update a Windows 7/8 PC that you already use, click here for our Windows 10 Upgrade Guide.
In this article, Niketrainers.com.co will tell you:
Prerequisites to download and install Windows 10
Before we get to the bottom of it, here are a few things you need to follow in this guide:
- A separate Windows computer from the one you are installing Windows 10 on to create installation media.
- A USB flash drive with a capacity of 8 GB or more for creating installation media.
After meeting these prerequisites, it’s time to download the installer.
Buy a media creation tool
First,click here to go to the download page, then click “Download Tool Now” and hit “Save” in the popup. By default, the .exe file you just downloaded should go to your Downloads folder.
After downloading the media creation tool, click the .exe file in your browser or the folder where it was downloaded. You will receive a message from User Account Control. Click Yes to start the authoring tool.
You will then receive an EULA. Read as you see fit and click Accept to continue.
On the next screen, you will have the option to “Update this computer now” or “Create installation media for another computer”. Click “Create Installation Media” and go to the next section.
Select your version of Windows 10 and create installation media
You will have several different options to choose from.
The language and editing are self-explanatory, but the architecture may not be, depending on how many years you’ll be installing on your Windows 10 PC. If your CPU supports Windows 64-bit, you’ll usually want to install the 64-bit version of the operating system. even if there is no more than 4 GB of RAM, for compatibility reasons.
The 32-bit version is only recommended for installing Windows 10 on older computers that are not compatible with the 64-bit version of Windows, and selecting both is generally a waste of bandwidth and external drive space.
After confirming your selection, click “Next” and then select “USB Flash Drive”.
On the next screen, select the USB flash drive from the drop-down menu and click “Next” again.
You will have to wait for the download of your chosen version of Windows 10. If for some reason you disagree with our guidelines and have selected “Both” instead of 32 or 64 bit, expect the download time to be longer. As the installer says, you can still use your computer, just don’t try to close the window or turn off your computer while it’s running.
After the download is complete, the authoring tool will automatically use these files to create the installation media. When you are done, you should get a screen similar to the one shown below. Click “Finish” and you are done.
Run the installer on a new computer
After creating the installation media, you need to connect the USB drive to the new computer and turn it on. Most computers should automatically register the USB drive and run it in the Windows 10 installer, which will automatically guide you through the setup process.
However, if you plug in a USB drive and nothing happens, you may need to manually make it the first boot drive in your computer’s BIO. The instructions on how to do this will vary from computer to computer, but generally saveF8orF12run it in your BIO on startup. If you have any problems setting the USB drive as the first boot drive or entering BIO on your computer, check the user manual or the manufacturer’s website for further help.
Ending
Congratulations when you finish running the installer on your new computer! You’ve installed Windows 10. At this point, the first thing we recommend to most users is to check out our guide to setting up a new Windows 10 PC.