Windows 10 has proven to be one of the friendliest versions of Windows to date. If you have an older Windows operating system, Microsoft doesn’t support it anymore, so there may be a better upgrade to Windows 10. There are several ways to do this, and you don’t even need to format the drive. Here are some ways to upgrade to Windows 10 easily.
In this article, Niketrainers.com.co will tell you:
1. Installing Windows 10 from a boot disk
If you have access to a verified copy of Windows 10, you can easily create a bootable disk from it and then use it to install Windows 10. It only requires a flash drive larger than 6 GB and knowledge of how to access it. BIOS. settings. The advantage of installing Windows 10 with a startup disk is that you can keep the flash drive in case you reinstall or repair the operating system.
To install Windows 10 from your startup disk, you’ll need to boot into your USB drive first. This will require entering the BIOS (usually pressF2,F12orZwhen booting the computer) and enable booting from a flash drive.
Once launched, you will be able to install Windows on your system. Just accept the terms and follow the installation instructions to complete.
After you do this, you can turn on your computer and log into Windows 10. You will be prompted to enter some information, and the operating system may also need to download an update. If you are in a rush, you can schedule it for later.
2. Take advantage of the free upgrade to Windows 10
You can easily upgrade from Windows 7 or 8.1 for free. This only works if your previous version of Windows is genuine.
To use this method, find your existing Windows 7 or 8.1 key and type it in just in case. Then head over to Microsoft,download the setup software,and run it.
After that, you don’t have to do much as installing Windows 10 requires little user input into these settings. Once installed, it will download all relevant updates and patches, so you may need to access the Internet. If you are in a rush, you can schedule it later.
3. Using the command prompt to force a fast update of Windows 10
It is possible to use the command prompt to force the computer to upgrade to Windows 10.
1. Go to update settings and make sure your computer is set up for automatic update.
2. Go to the “C: Windows SoftwareDistribution Download” folder. Delete everything it contains by pressingkontrola+DOto select all files, then pressWymazaćthe button.
3. Open a command prompt by clicking the Start button. In the command prompt window enter:
and press Enter.
After a few minutes, check for updates manually using the Windows Update application on your computer. You should see the Windows 10 download option. Click here to download the operating system, which should then automatically update itself without deleting any files or changing any settings.
Ending
The beauty of upgrading to Windows 10 with these methods is that they don’t take long. They also allow you to keep all your files and settings. After upgrading to Windows 10, be aware of potential problems caused by the Windows upgrade and its solutions.